Equipment
Showing 241–260 of 310 results
-
Safeline X-33 X-Ray Machine
X-33
The X-33 Series machines are intended for inspection of packaged products. These systems use a vertical view of the product.
X-33 is optimized for the low intensity “soft-X-ray” energy range. When coupled with it’s unique high dynamic range detection system, unparalleled image discrimination is achieved. Construction is 100% lead free therefore eliminating any hazardous material consideration.
-
SEALTECH
Semi-Automatic tray sealer, as you push the tray carrier in the film automatically moves over the top of the tray to be sealed, the machine will seal and cut the film using an electric driven motor. Features digital temperature control with adjustable seal timer. #304 Stainless Steel Construction. Will run APET or CPET trays, 110 volt. (One set of tooling included with purchase)
-
SFE-800AU Right Angle Automatic
“Right Angle Automatic” infeed conveyor with dual photo eye operation. Multiple stroke count will allow for many different product configurations 3×2, 5×2, 3×5, etc 6, 8, 12, or 24 packs. *Production rate of up to 15 PPM depending on package size and configuration. Great for bottles, cans or boxes were multiple packages are required to make a bundle.
-
SFE-800NF Inline Automatic
“Inline Fully Automatic” sleeve wrapper with attached tunnel. Power belt infeed conveyor with photo to activate cycle start, pneumatic product hold down, dual powered film unwind, metal mesh tunnel conveyor belt, discharge cooling blower. Speeds of 5 to 15 PPM, depending on product size and film thickness.
-
SFE-800SA Semi Automatic
“Semi-automatic” sleeve wrapper with attached tunnel. Dual push button operation with pneumatic pusher bar to advance product through seal area, digital temperature controls, pneumatic product hold down, metal mesh tunnel conveyor with cooling fan. Speeds of 4 to 12 PPM depending on product size and film thickness.
-
SFE-800SA/SS Semi Automatic in Stainless Steel
“Semi-automatic” “Stainless Steel” frame construction sleeve wrapper with attached tunnel. Dual push button operation with pneumatic pusher bar to advance product through seal area, digital temperature controls, pneumatic product hold down, metal mesh tunnel conveyor with cooling fan. Speeds of 4 to 12 PPM depending on product size and film thickness.
-
Side Apply Labeling Machines
PP-625
A fully automatic label applicator to apply a label to the side of any container. Fast operating speed at 80 FPM, Delta PLC and color touch HMI. -
Side Apply Labeling Machines PP-602
PP-602
A side apply label applicator with stand, great for customers who have an existing conveyor line.
-
Side Apply Labeling Machines PP-625J
PP-625J
A fully automatic side apply label applicator with corner wrap.This unique label applicator will apply a label to the side of a container and then wrap the label around the corner so the label can be seen from 2 sides.
-
Skin Packaging Cards
There is more to making a skin or blister card than just printing on a piece of board stock. All materials must be specifically selected for their compatibility with one another, which includes specially formulated inks, solvents, papers, and coatings, all of which must be systematically applied. Through years of research and development, with complete in-house processing, has developed a unique series of patented manufacturing processes which allows us to produce the most consistantly high quality cards possible. These materials are available as while blanks, solid color blanks, or may be printed in simple one color line work to sophisticated four-color process.
-
Skin Packaging Film (Surlyn)
Surlyn Skin Film is heated then applied to the skin card to hold product in place.
-
SS-502 High Speed
-
SS-502 High Speed in Stainless Steel
-
SS-502 Servo Drive
SS-502 is a fully automatic strapping machine with servo drive motors and PLC controlled. The SS-502 strapper can run 5,6,7,8,9 mm strap width and cycle at 50 straps per minute.
-
ST-10 DIP TANK
ST-10 Shrink /Dip Tank, Stainless Steel construction, Immersion platform size 22.8” x 13.7”, Max product height 12”, 30 Gallon tank, up to 15 cycles per minute, 230 V, 3 phase
-
ST-1250_Retractable
-
ST-1250EX Pneumatic
-
ST-700 DIP TANK
ST-700 Automatic Dip Tank, Stainless Steel construction, Immersion platform 34” x 24.8” x 10.8” max product height, 85 gallon tank, up to 8 cycles per minute, 230 V 3 phase.
-
Stainless steel metal mesh belting
Stainless steel metal mesh belting
is used in most food applications or where a moist enviornment exists. -
Standalone Auger Filler with Screw Conveyor